CD292 SERIES

   ALUMINUM ELECTROLYTIC CAPACITORS 

 

  • Load life 2000 hours at 85oC

  • Snap-in terminals(4 pins), High reliability.
  • SPECIFICATIONS
Item Characteristics
Operating Temperature Range(oC) -40~+85 -25~+85
Rated Voltage Range (V) 10~100 160~450
Nominal capacitance range (uF) 1800~82000 180~2200
Capacitance Tolerance(20oC,120Hz) +/-20%
Leakage current (uA)  I<=0.01CV( uA) or 1.5mA whichever is smaller (at 20oC, after 5 minutes)
C: Nominal Capacitance (uF) V: Rated Voltage (V)
Dissipation Factor(20oC,120Hz)

Rated voltage (v)  10-16 25 35-50 63 80-100
Cap (uF)
<=2700 - - 0.20 0.15 0.15
3300-4700 - 0.35 0.25 0.20 0.15
5600-6800 0.40 0.35 0.30 0.20 0.20
>=8200 0.40 0.35 0.35 0.25 -
Rated voltage (v) 160-200 250-450
D=35 0.12 0.15
Temperature Stability(120Hz)
Rated voltage (v) 10 16-35 50-100 160-200 250-400 450
Impedance Ratio Z-25oC/Z+20oC 5 4 3 3 4 4
Z-40oC/Z+20oC 18 15 10 6 8 -
Load Life(+85oC)
Time 2000 hours
Leakage Current Not more than the specified value.
Capacitance Change Within +/-20% of the initial value.
Dissipation Factor Not more than 200% of the specified value.
Shelf Life(+85oC)
Time 500 hours
Leakage Current Not more than the specified value.
Capacitance Change Within +/-20% of the initial value.
Dissipation Factor Not more than 200% of the specified value.

After test : Rated voltage to be applied for 60 minutes, 24 to 48 hours before measurement.

 
  • DIMENSIONS                              mm 
  • MULTIPLIER FOR RIPPLE CURRENT

Frequency coefficient

Freq (Hz) 50 120 1K 10K 20K
Rated Voltage(V)
<=50 0.95 1 1.10 1.15 1.15
63~100 0.95 1 1.16 1.30 1.33
>=160 0.95 1 1.20 1.50 1.55

Temperature coefficient

Temperature(oC) +40 +55 +70 +85
Rated voltage(V)
<60 2.1 1.8 1.5 1
>=160 1.7 1.5 1.3 1
  • STANDARD RATINGS

    

  WV(V) 10 16 25 35 50 63 80 100
Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple
Dxl(mm)  
uF (A) uF (A) uF (A) uF (A) uF (A) uF (A) uF (A) uF (A)
35x25 33000 4.8 22000 4.4 15000 3.9 8200 2.9 5600 2.6 3900 2.7 2700 2.5 1800 2.2
35x30 47000 6.0 33000 5.6 18000 4.4 12000 3.6 8200 3.0 5600 3.3 3900 3.2 2200 2.5
35x35 56000 6.8 39000 6.3 22000 5.0 15000 4.1 10000 3.4 6800 3.7 4700 3.6 3300 3.1
35x40 68000 7.7 47000 7.2 33000 6.5 18000 4.7 12000 3.8 8200 3.8 5600 3.5 3900 3.4
35x45 82000 8.7 56000 8.0 39000 7.5 22000 5.3 - - 10000 4.3 - - - -
35x50 - - - - - - 27000 7.0 15000 4.5 12000 4.8 6800 4.1 4700 4.0

      

  WV(V)  160 180 200 250 315 350 400 450
Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple
Dxl(mm)  
uF (A) uF (A) uF (A) uF (A) uF (A) uF (A) uF (A) uF (A)
35x25 820 2.4 680 2.2 560 2.0 470 1.9 270 1.3 220 1.3 180 1.2 180 1.2
35x30 1000 2.7 820 2.5 820 2.5 680 2.4 390 1.6 330 1.6 270 1.5 220 1.3
35x35 1200 3.0 1200 3.1 1000 2.8 820 2.6 470 1.8 390 1.8 330 1.7 270 1.5
35x40 1500 3.5 - - 1200 3.2 1000 3.0 560 2.0 470 2.0 390 1.8 - -
35x45 1800 3.9 1500 3.6 - - 1200 3.4 680 2.3 560 2.3 470 2.1 390 1.9
35x50 2200 4.5 1800 4.1 1500 3.8 - - - - 680 2.6 560 2.3 470 2.2

     Ripple current: 85oC, 100Hz or 120Hz

      The specific capacitance and case size are available on request.